The innovative T-Max UV Glass has a 9H surface hardness, so it is extremely scratch resistant even when contacting sharp objects such as a knife or wrenches.
It is covered with a special oleophobic coating, which reduces the amount of fingerprints or other impurities.
T-Max is glued with a liquid substance over the entire surface of the screen and then using a UV lamp the substance is cured. Thanks to this combination, we get the ideal effect of smoothness, clarity and responsiveness on the screen.
Check how to mount: https://www.youtube.com/watch?v=W3QKLhnncG
* We do not recommend using 3D glass without any casing.
** We do not recommend using glass if the case overlaps too much on the edges of the screen.
*** Remember to remove and re-add fingerprint after installing the foil/glass to the screen.
**** The functionality of the fingerprint reader in the screen may be disturbed in the case of a film/glass coating installed. The fingerprint reader is not fully refined from this angle.
***** The assembly has been simplified to the maximum, but you need to remember to read the instructions before mounting and watch the instructional video and follow all steps set by the manufacturer, only in this way you will get 100% satisfaction.
****** Glass after dismantling does not leave any trace on the screen.
INSTALLATION INSTRUCTIONS:
1) Begin installation in the bathroom just after the bath - steam will absorb all the dust from the atmosphere and it will not interfere with the installation.
2) Clean thoroughly and degrease the surface of the screen, then with a dry cloth, polish it to a flash.
3) With tapeworm, seam the speaker.
4) Pour the liquid into the very center of the device.
5) Install glass as possible as possible, this step can also be corrected before hardening the surface at the time when the liquid is on the screen along with glass
6) With the UV lamp, cure the glass in five places of 15 seconds.
7) Clear your phone and enjoy the job well done
PRODUCT FEATURES:
- 100% Original
- Packed with original packaging
- 0.3mm thickness tempered glass
- 9H Resistance
- Not affecting touch sensitivity
- Equipped with nano fat-resistant coating and fingerprints
- Contoured edges 2.5D
- Dimensions: 160x75mm
SET INCLUDES:
1 x T-Max UV Glass Tempered Glass
1 x UV Lamp
1 x Installation Tools
Do you have experience with this product? Help others to choose.